Source: https://www.youtube.com/@FixItPhil/videos
2010 Honda Civic Cabin Air Filter Replacement Guide
How to Change the Cabin Air Filter in Your 2010 Honda Civic |
|
The cabin air filter in your Honda Civic is an essential component that helps maintain a clean and healthy environment inside your vehicle. Replacing it regularly can improve air quality, reduce odors, and even help alleviate allergy symptoms. In this article, we'll guide you through the process of changing the cabin air filter in your 2010 Honda Civic.
|
Important Notes |
- This guide applies to Honda Civic models from 2006 to 2011 (8th generation).
- Perform this repair at your own risk, as we cannot guarantee your safety or the success of the process.
|
The Replacement Air Filter |
|
We recommend using a high-quality replacement air filter, such as the Fram Fresh Breeze with Arm and Hammer model CF-10134. This filter is specifically designed for your Honda Civic and features a unique baking soda preservation process that maintains its effectiveness.
- Part Number: CF-10134
- Manufacturer: Fram
- Model: Fresh Breeze with Arm and Hammer
- Price: Approximately $14 (available at Walmart and other retailers)
|
Step-by-Step Instructions |
- Open the passenger side glove box and empty its contents.
- Place your hands on either side of the glove box and press gently inwards to release the catches. This will allow you to pull the drawer towards you and drop it all the way down.
- Behind the drawer, you'll find the air filter tray. Press the tabs on either side with your fingers to release them, then pull the tray straight out.
- Remove the old air filter from the tray and discard it.
- Take the new air filter and ensure the arrow on one side is pointing down (indicating the direction of airflow). The creases on the filter should run horizontally.
- Place the new filter in the tray, ensuring it's properly seated and the arrow is aligned with the arrows on the tray.
- Slide the tray back into its slot until you hear the clasps click.
- Lift the glove box drawer back into place and close it.
|
Tips and Reminders |
- Changing the cabin air filter is a simple process that takes less than one minute.
- The replacement air filter costs approximately $14, which can be ordered online or purchased at a local retail store like Walmart.
- We recommend checking and replacing your cabin air filter every 12,000 to 18,000 miles or as needed.
|
| Cabin Filter |
| A cabin filter is an essential component of a vehicle's heating and air conditioning (HVAC) system. It plays a crucial role in maintaining the quality of the air inside the car by filtering out dust, pollen, and other airborne contaminants. |
| Background: |
| The cabin filter was first introduced in the early 2000s as a response to growing concerns about indoor air quality. Prior to this, vehicles relied on simple air vents that drew in unfiltered outside air. As awareness of air pollution and its health impacts grew, manufacturers began incorporating cabin filters into their designs. |
| Today, cabin filters are a standard feature in most modern vehicles. They are typically located behind the glove box or under the dashboard and are designed to capture 99.97% of particles as small as 0.3 microns, including dust, pollen, mold spores, and other airborne allergens. |
2010 Honda Civic Cabin Air Filter Replacement Guide |
| The cabin air filter in your 2010 Honda Civic plays a crucial role in maintaining the quality of the air inside your vehicle's cabin. Over time, this filter can become clogged with dust, pollen, and other debris, reducing its effectiveness and potentially causing unpleasant odors or reduced airflow. Replacing the cabin air filter is a relatively simple process that you can do yourself with a few tools. Here's a step-by-step guide to help you replace your 2010 Honda Civic's cabin air filter. |
| Tools Needed: |
New cabin air filter (Honda Genuine or equivalent) |
| Step 1: Locate the Cabin Air Filter |
The cabin air filter in your 2010 Honda Civic is located behind the glove box. You'll need to remove the glove box to access it. |
| Step 2: Remove the Glove Box |
Open the glove box and empty its contents. You'll see two screws at the back of the glove box. Remove these screws using a Phillips screwdriver. Gently pull the glove box towards you to release it from its clips. |
| Step 3: Access the Cabin Air Filter |
Behind the glove box, you'll see a plastic panel held in place by two screws. Remove these screws and gently pull the panel towards you to access the cabin air filter. |
| Step 4: Remove the Old Cabin Air Filter |
Gently pull out the old cabin air filter from its housing. It may be a bit dirty or clogged with debris, so handle it carefully to avoid spreading dust around. |
| Step 5: Install the New Cabin Air Filter |
Take your new cabin air filter and insert it into its housing. Make sure it's properly seated and the gaskets are in place to ensure a tight seal. |
| Step 6: Reassemble Everything |
Put back the plastic panel you removed earlier, securing it with the two screws. Then, reattach the glove box using its original screws and clips. Make sure everything is securely in place. |
| Tips and Reminders: |
It's recommended to replace your cabin air filter every 12,000 to 18,000 miles or as needed. Regular replacement can help maintain good air quality inside your vehicle and reduce the risk of unpleasant odors or reduced airflow. |
| Q1: What is the location of the cabin air filter in my 2010 Honda Civic? |
The cabin air filter is located behind the glove box, on the passenger side of the vehicle. |
| Q2: How do I access the cabin air filter in my 2010 Honda Civic? |
To access the cabin air filter, you will need to remove the screws that hold the glove box in place, then pull the glove box towards you to release it from its clips. |
| Q3: What type of cabin air filter does my 2010 Honda Civic use? |
Your 2010 Honda Civic uses a rectangular-shaped cabin air filter, which is approximately 10 inches long and 5 inches wide. |
| Q4: How often should I replace the cabin air filter in my 2010 Honda Civic? |
It is recommended to replace the cabin air filter every 12,000 to 18,000 miles, or as needed. |
| Q5: Can I clean and reuse the cabin air filter in my 2010 Honda Civic? |
No, it is not recommended to clean and reuse the cabin air filter. It should be replaced with a new one to ensure optimal performance. |
| Q6: What tools do I need to replace the cabin air filter in my 2010 Honda Civic? |
You will need a screwdriver (preferably a Phillips head) and a new cabin air filter. |
| Q7: How long does it take to replace the cabin air filter in my 2010 Honda Civic? |
The replacement process should take around 10-15 minutes, depending on your level of comfort with DIY car repairs. |
| Q8: Can I purchase a replacement cabin air filter at my local auto parts store? |
| Q9: Are there any specific precautions I should take when replacing the cabin air filter in my 2010 Honda Civic? |
Yes, make sure to disconnect the negative battery cable before starting the replacement process, and avoid touching any electrical components. |
| Q10: Will a dirty or clogged cabin air filter affect the performance of my 2010 Honda Civic? |
| Pioneers/Companies |
Year Founded |
Description |
| 1. Fram Filters |
1932 |
A leading manufacturer of automotive filters, including cabin air filters for Honda Civic models. |
| 2. Wix Filters |
1939 |
A well-established company that produces high-quality cabin air filters compatible with Honda Civic models. |
| 3. K&N Engineering |
1969 |
A pioneering company in the automotive filtration industry, offering high-performance cabin air filters for Honda Civic models. |
| 4. Purolator Filters |
1923 |
A renowned manufacturer of automotive filters, including cabin air filters designed for Honda Civic models. |
| 5. Bosch Auto Parts |
1886 |
A leading global supplier of automotive parts, including high-quality cabin air filters compatible with Honda Civic models. |
| 6. Mahle Filters |
1920 |
A German-based company that specializes in the production of high-performance filters, including cabin air filters for Honda Civic models. |
| 7. Denso Auto Parts |
1949 |
A Japanese-based company that manufactures high-quality automotive parts, including cabin air filters designed for Honda Civic models. |
| 8. AC Delco Auto Parts |
1916 |
A leading manufacturer of automotive parts, including cabin air filters compatible with Honda Civic models. |
| 9. Hastings Filters |
1944 |
A US-based company that specializes in the production of high-quality filters, including cabin air filters for Honda Civic models. |
| 10. Mann+Hummel Filters |
1941 |
A German-based company that manufactures high-performance filters, including cabin air filters designed for Honda Civic models. |
| Tools Needed: |
Phillips screwdriver, Flathead screwdriver, Torx screwdriver (for some models) |
| Location of Cabin Air Filter: |
Behind the glove box, on the passenger side of the dashboard |
| Steps to Replace the Cabin Air Filter: |
- Open the glove box and empty it.
- Remove the screws that hold the glove box in place using a Phillips screwdriver. There are usually two screws on each side.
- Gently pull the glove box towards you to access the cabin air filter housing.
- Release the clip that holds the cabin air filter housing in place by sliding it towards you.
- Open the cabin air filter housing and pull out the old filter.
- Remove any additional clips or screws that hold the old filter in place.
- Install a new cabin air filter, making sure it is properly seated and secured with the clips or screws you removed earlier.
- Close the cabin air filter housing and slide the clip back into place to secure it.
- Replace the glove box and reattach it using the Phillips screws you removed earlier. Make sure they are tightened securely.
|
| Tips and Precautions: |
- Make sure to purchase a cabin air filter that is compatible with your 2010 Honda Civic.
- Use a gentle touch when handling the electrical components in the dashboard to avoid damaging them.
- Avoid touching any of the internal components of the cabin air filter housing to prevent damage or contamination.
|
| Cabin Air Filter Specifications: |
- Filter Type: Activated Carbon and Particulate
- Filter Size: 7.5 x 4.5 inches (19 cm x 11 cm)
- MERV Rating: MERV 8-10
|
| Recommended Replacement Interval: |
Every 12,000 to 18,000 miles (19,312 to 28,968 km), or as needed based on visual inspection and air quality |
| Troubleshooting: |
- If the cabin air filter is not fitting properly, check that it is installed correctly and that there are no obstructions in the housing.
- If the air quality in the vehicle is poor after replacing the cabin air filter, inspect the filter for damage or contamination and replace it if necessary.
|
|