Source: https://www.youtube.com/@FixItPhil/videos

Nutribullet Pro 900 Repair Fixing a Broken Actuator

NutriBullet Pro 900 Series Blender Repair Guide
In this comprehensive guide, we will walk you through the process of disassembling and repairing your NutriBullet Pro 900 series blender. This repair is necessary when your blender stops working despite being able to press the cup in fully and lock it in place.

Tools Required
Before starting the repair, ensure you have the following tools:
  • Screwdriver (preferably a Phillips head screwdriver)
  • Pliers or a wrench for gripping small parts
  • Super Glue (also known as cyanoacrylate adhesive)
  • Baking soda (sodium bicarbonate)

Disassembly Steps
Follow these steps to disassemble your NutriBullet Pro 900 series blender:
  1. Flip the NutriBullet base over and remove the four screws that hold it in place.
  2. Lift the bottom cover straight up, and it should slide off.
  3. Remove the three screws around the motor, then the two screws over the power cord guide.
  4. Unseat the power cord from the base and take off the outer ring by feeding the power cable through it.
  5. Remove the metal sleeve by doing the same.
  6. Flip the unit back over and take out the three rubber seals by pulling firmly.
  7. Remove the three screws under these covers.

Cleaning and Inspection
While disassembled, take the opportunity to clean the blender's internal components:
  • Wipe off any residue from previous spills and leaks.
  • Clean the long white actuator tabs.
Inspect the blender for any damage or wear. In this case, one of the plastic posts securing an actuator had snapped off.

Repair Steps
To repair your NutriBullet Pro 900 series blender, follow these steps:
  1. Remove the two screws holding in the switch.
  2. Clean the adjacent actuator tab even though it doesn't have a switch on it.
  3. Apply a small amount of Super Glue to the broken post and attach it back into place. Make sure it is lined up exactly like two pieces of a puzzle.
  4. Reinforce the bond by carefully applying some baking soda to the glue, creating a chemical reaction that hardens up the glue fast and gives it added strength.

Reassembly Steps
To reassemble your NutriBullet Pro 900 series blender, follow these steps:
  1. Replace any switches you've removed for cleaning, their springs and clips, and secure them with their screws.
  2. Line up the exhaust vents and feed the power cable through when replacing the metal shell.
  3. Pull the cable through the base and rotate it until it falls into place.
  4. Slip the power cable into the slot at the back, making sure the strain relief creates a seal on the inside and outside of the base.
  5. Secure the wires inside under the guide post with the plastic clip.

Testing the Blender
Once reassembled, test your NutriBullet Pro 900 series blender to ensure it is working properly. You should hear the click of both actuators and the motor and blades spinning.

Nutribullet Repair The Nutribullet is a popular blender brand that has been widely used for its ease of use and ability to create smooth and nutritious drinks. However, like any other appliance, it can break down or malfunction over time, requiring repair.
Background The Nutribullet was first introduced in 2012 by Homeland Housewares, a company founded by Eric Yang. The blender quickly gained popularity due to its unique design and ease of use. Since then, the company has released several models of the Nutribullet, each with improved features and performance.
Common Issues Some common issues that may require repair include a faulty motor, broken blades, or damaged cups. In some cases, the blender may not be turning on, or it may be leaking. These issues can often be resolved with simple repairs or replacements.
Repair Options If your Nutribullet is no longer under warranty, there are still several options for repair. You can contact the manufacturer's customer service department to inquire about authorized repair centers in your area. Additionally, many online retailers offer repair services or replacement parts for the Nutribullet.

Nutribullet Pro 900 Repair: Fixing a Broken Actuator
Is your Nutribullet Pro 900 not turning on or blending properly? A broken actuator might be the culprit. In this article, we'll guide you through the process of repairing and replacing the actuator in your Nutribullet Pro 900.
What is an Actuator? The actuator is a crucial component of the Nutribullet Pro 900, responsible for controlling the blender's motor and ensuring smooth blending operations. It's essentially the brain of the blender, sending signals to the motor to adjust speed and torque.
  • The blender won't turn on or has intermittent power issues.
  • The blades won't spin or move slowly.
  • Unusual noises or vibrations during operation.
Symptoms of a Broken Actuator:
  1. Ensure the blender is properly assembled and all parts are securely locked in place.
  2. Check for any blockages or food debris in the blades or pitcher.
  3. Verify that the power cord is securely plugged into both the blender and the wall outlet.
Troubleshooting Steps:
Repairing the Actuator: If troubleshooting doesn't resolve the issue, it's likely that the actuator needs to be replaced. You can purchase a replacement actuator from the manufacturer or a third-party supplier.
  1. Unplug the blender and remove any remaining food particles or liquid.
  2. Disconnect the power cord from the actuator.
  3. Remove the screws holding the actuator in place and gently pull it out.
  4. Install the new actuator, ensuring proper alignment and secure fastening with screws.
Replacement Process:
  • Before starting the repair process, ensure you have a replacement actuator that matches your Nutribullet Pro 900 model.
  • Avoid touching any electrical components or wires during the repair process.
  • If you're not comfortable with DIY repairs or if the issue persists after replacing the actuator, consider consulting a professional or contacting the manufacturer's customer support.
Tips and Precautions:
By following these steps and tips, you should be able to successfully repair and replace the broken actuator in your Nutribullet Pro 900. Remember to always follow safety precautions when working with electrical appliances, and happy blending!

Q1: What is the most common issue with the Nutribullet Pro 900's actuator? The most common issue is that it stops working or becomes faulty, requiring repair or replacement.
Q2: How do I diagnose a broken actuator in my Nutribullet Pro 900? Check if the blades are spinning when you press the button. If not, it may indicate an issue with the actuator.
Q3: Can I repair a broken actuator in my Nutribullet Pro 900 myself? Yes, but it requires technical expertise and caution. You can try cleaning or replacing faulty components, but be careful not to damage other parts.
Q4: What are the symptoms of a failing actuator in Nutribullet Pro 900? Symptoms include slow blade spinning, intermittent operation, or complete failure to spin.
Q5: How do I access the actuator in my Nutribullet Pro 900 for repair? You'll need to disassemble the unit by removing screws and taking apart the casing. Be careful not to damage any components.
Q6: Can I replace the actuator in my Nutribullet Pro 900 with a new one? Yes, but it may require soldering and technical expertise. Make sure to purchase a compatible replacement part.
Q7: What are some common causes of actuator failure in Nutribullet Pro 900? Causes include overloading, using the wrong voltage, or worn-out components due to excessive use.
Q8: How can I prevent my Nutribullet Pro 900's actuator from breaking in the future? Regularly clean and maintain your unit, avoid overloading, and follow the manufacturer's guidelines for use.
Q9: Are there any safety precautions I should take when repairing my Nutribullet Pro 900's actuator? Yes, be careful with electrical components, avoid touching internal parts, and ensure the unit is unplugged before starting repairs.
Q10: Where can I find repair guides or tutorials for fixing my Nutribullet Pro 900's actuator? Check online forums, YouTube tutorials, and the manufacturer's website for guidance on repairing your unit.


Rank Pioneers/Companies Description
1 NutriBullet The original creators of the NutriBullet Pro 900, offering official repair services and replacement parts.
2 iFixit A popular repair community providing step-by-step guides and replacement parts for various NutriBullet models, including the Pro 900.
3 Amazon Warehouse Deals An online marketplace offering certified refurbished and used NutriBullet Pro 900 units, often with warranty and repair options.
4 eBay A popular online marketplace where users can find replacement parts, refurbished units, and repair services for the NutriBullet Pro 900.
5 YouTube Repair Channels A community of DIY repair enthusiasts sharing video tutorials and guides on fixing common issues with the NutriBullet Pro 900.
6 FixYa A repair community providing troubleshooting guides, repair manuals, and replacement parts for various appliances, including the NutriBullet Pro 900.
7 Appliance Blog A website offering repair guides, troubleshooting tips, and replacement parts for various appliances, including the NutriBullet Pro 900.
8 Repair Clinic A repair community providing troubleshooting guides, repair manuals, and replacement parts for various appliances, including the NutriBullet Pro 900.
9 PartSelect An online retailer specializing in appliance parts, including those for the NutriBullet Pro 900.
10 Sears Parts Direct An online retailer offering genuine OEM parts for various appliances, including those for the NutriBullet Pro 900.


Nutribullet Pro 900 Repair: Fixing a Broken Actuator
Tools and Materials Needed:
  • Torque screwdriver (T20)
  • Phillips screwdriver (#2)
  • Pliers
  • Actuator replacement part ( Nutribullet Pro 900 Actuator Assembly )
  • Lubricant (silicone-based)
Step-by-Step Instructions:
  1. Disconnect the power cord from the blender base.
  2. Remove the blender jar and any remaining ingredients.
  3. Flip the blender over and locate the actuator assembly, which is held in place by four T20 screws.
  4. Use a torque screwdriver to remove the screws and gently pry the actuator assembly away from the blender base.
  5. Carefully disconnect the electrical connector from the actuator assembly.
  6. Remove any remaining screws or clips holding the broken actuator in place.
  7. Gently pull the broken actuator out of the blender base.
  8. Inspect the area for any debris or obstructions and clean as necessary.
  9. Apply a small amount of lubricant to the new actuator's pivot point.
  10. Align the new actuator with the blender base and gently push it into place.
  11. Reattach the electrical connector to the new actuator assembly.
  12. Replace any screws or clips removed earlier.
  13. Reattach the actuator assembly to the blender base using the T20 screws.
  14. Tighten the screws securely, but do not overtighten.
Troubleshooting Tips:
  • If the blender still does not turn on after replacing the actuator, check for any blockages or debris in the electrical connector.
  • If the blender turns on but does not blend properly, ensure that the new actuator is securely attached and aligned with the blender base.