Source: https://www.youtube.com/@FixItPhil/videos

Philips Norelco Body Groomer Battery Replacement Guide

Replacing the Battery in Your Philips Norelco Ultimate Body Groomer (BG2030)
If you're like me and have owned your Philips Norelco Ultimate Body Groomer for a long time, you may start to notice that the battery no longer holds a charge. In my case, I've had this body groomer for almost 15 years, but unfortunately, the rechargeable batteries inside are no longer functioning properly. This means it's time to replace them.

Tools Needed:
Before we begin, make sure you have the necessary tools. You'll need a metal spudger or a small flathead screwdriver to pry open the back plate and remove the internal components.

Step 1: Remove the Back Plate
To access the internal components, you'll need to remove the back plate. Use your metal spudger or small flathead screwdriver to carefully pry it open.

Step 2: Remove the Internal Components
Once you've removed the back plate, you'll see the internal components. Carefully lift them out and set them aside.

Step 3: Locate the Battery
The battery is located inside the internal components. You should see two soldered terminals connected to the battery.

Step 4: Remove the Old Battery
Use a soldering iron to carefully remove the old battery from the internal components. Be careful not to damage any of the surrounding components.

Step 5: Install the New Battery
Before installing the new battery, make sure to pre-tin the tips of the wires and the soldering tabs. This will help ensure a secure connection.
Carefully place the new battery in its designated position and connect it to the internal components using the provided wires.
Use your soldering iron to secure the connections, starting with the red wire on the positive terminal. Make sure the connection is solid before moving on to the next step.
Solder the black wire to the negative terminals tab and check again to ensure a secure connection.

Step 6: Reassemble the Body Groomer
Now that you've installed the new battery, it's time to reassemble the body groomer. Start by replacing the internal components and then attach them back to the main body using the provided screws.
Make sure everything is securely in place before moving on to the next step.
Replace the back plate and press it firmly into position, making sure it's secure.

Step 7: Test the Body Groomer
Before using your body groomer for the first time after replacing the battery, make sure to test it.
Plug in the body groomer and let it charge fully for at least 8 to 10 hours. Once charged, turn it on and check that everything is working as expected.

Battery Replacement
Battery replacement is the process of substituting an old or depleted battery with a new one in a device. This procedure is essential for maintaining the functionality and performance of various devices, including smartphones, laptops, electric vehicles, and industrial equipment.
Background
Batteries have become an integral part of modern life, powering a wide range of devices that we use daily. However, batteries have a limited lifespan and eventually need to be replaced. The increasing demand for portable electronics, renewable energy systems, and electric vehicles has led to the development of various battery technologies, each with its unique characteristics, advantages, and limitations.
Over time, rechargeable batteries can lose their capacity to hold a charge, while non-rechargeable batteries may deplete faster due to internal resistance or chemical degradation. In some cases, physical damage, such as cracks or swelling, can also render a battery unusable.

Philips Norelco Body Groomer Battery Replacement Guide
Introduction: The Philips Norelco Body Groomer is a popular choice among men for its convenience and effectiveness in grooming. However, like all battery-powered devices, it requires periodic battery replacement to maintain optimal performance. In this article, we will provide a step-by-step guide on how to replace the batteries of your Philips Norelco Body Groomer.
Tools Needed: A new set of batteries (preferably alkaline or nickel-metal hydride), a screwdriver (optional)
Step-by-Step Instructions:
  1. Turn off your Philips Norelco Body Groomer and unplug it from the charging dock.
  2. Locate the battery compartment, usually found at the back or bottom of the device.
  3. Open the battery compartment by sliding it open or removing the screws that hold it in place. Some models may require a screwdriver to remove the screws.
  4. Carefully pull out the old batteries from the compartment.
  5. Dispose of the old batteries properly and insert the new ones, making sure they are aligned with the correct polarity (+/-).
  6. Replace the battery compartment cover or reattach it using the screws you removed earlier.
Tips and Precautions:
  • Use the correct type of batteries recommended by Philips Norelco to avoid damaging your device.
  • Avoid mixing old and new batteries, as this can cause leakage or damage to the device.
  • If you are not comfortable with DIY battery replacements, consider consulting a professional or contacting Philips Norelco customer support for assistance.
Conclusion: Replacing the batteries of your Philips Norelco Body Groomer is a relatively simple process that can be done at home with basic tools. By following this guide, you should be able to replace the batteries and get back to using your device in no time.

Q1: What type of battery does the Philips Norelco Body Groomer use? A1: The Philips Norelco Body Groomer uses a rechargeable Nickel-Metal Hydride (NiMH) battery.
Q2: How do I replace the battery in my Philips Norelco Body Groomer? A2: To replace the battery, you will need to disassemble the device by removing the screws at the back. Then, carefully pull out the old battery and replace it with a new one.
Q3: What are the dimensions of the battery used in the Philips Norelco Body Groomer? A3: The battery used in the Philips Norelco Body Groomer is approximately 42mm x 25mm x 10mm.
Q4: Can I use a standard AA or AAA battery as a replacement? A4: No, the Philips Norelco Body Groomer uses a custom-sized NiMH battery. Using a standard AA or AAA battery may not provide the correct voltage and may damage the device.
Q5: How long does it take to charge the battery in my Philips Norelco Body Groomer? A5: The charging time for the Philips Norelco Body Groomer is approximately 8 hours.
Q6: Can I replace the battery with a Lithium-ion (Li-ion) battery? A6: No, it's not recommended to use a Li-ion battery as a replacement. The Philips Norelco Body Groomer is designed to work with NiMH batteries.
Q7: How do I know if my Philips Norelco Body Groomer needs a new battery? A7: If your device is not holding its charge or the performance is decreasing, it may be time to replace the battery.
Q8: Can I purchase a replacement battery from Philips? A8: Yes, you can contact Philips customer support or visit their website to purchase a genuine replacement battery for your Philips Norelco Body Groomer.
Q9: How long does the battery last in my Philips Norelco Body Groomer? A9: The battery life of the Philips Norelco Body Groomer is approximately 50 minutes to 1 hour.
Q10: Can I use a third-party replacement battery in my Philips Norelco Body Groomer? A10: While it's possible to use a third-party replacement battery, it may not provide the same performance and quality as a genuine Philips battery.


Pioneers/Companies Description
1. Philips Founded in 1891, Philips is a Dutch multinational technology company that developed the first electric razor and has since become a leading brand in personal care appliances.
2. Norelco Norelco is a brand of electric shavers owned by Philips, known for its high-quality shaving products, including the popular Body Groomer series.
3. Energizer Energizer is an American battery manufacturer that has developed various battery types, including those used in personal care appliances like the Philips Norelco Body Groomer.
4. Panasonic Panasonic is a Japanese multinational electronics company that produces a range of personal care products, including electric shavers and trimmers.
5. Wahl Wahl is an American company that specializes in personal grooming products, including clippers, trimmers, and shavers, and has developed innovative battery technologies for its products.
6. Duracell Duracell is a brand of batteries owned by Berkshire Hathaway, known for its high-quality alkaline batteries used in various appliances, including personal care devices like the Philips Norelco Body Groomer.
7. iRobot iRobot is an American company that specializes in robotics and consumer electronics, and has developed innovative battery technologies for its products, including those used in personal care appliances.
8. Remington Remington is a British company that produces a range of personal care products, including electric shavers, trimmers, and epilators, and has developed innovative battery technologies for its products.
9. Braun Braun is a German company that specializes in personal grooming products, including electric shavers, epilators, and trimmers, and has developed innovative battery technologies for its products.
10. Conair Conair is an American company that produces a range of personal care products, including electric shavers, trimmers, and epilators, and has developed innovative battery technologies for its products.


Component Description Technical Details
Battery Type NiMH (Nickel-Metal Hydride) 1.2V, 2000mAh, AA size
Battery Connector JST PH 2-pin connector Pitch: 2mm, Current rating: 2A, Voltage rating: 12V
Charging Circuit Linear charging circuit with thermistor monitoring Charging voltage: 1.4V, Charging current: 200mA, Thermistor: NTC 10kΩ
Battery Holder Plastic battery holder with metal contacts Material: ABS plastic, Contact material: Brass, Spring force: 0.5N
Battery Compartment Sealed compartment with screw-down lid Material: PC+ABS plastic, Sealing gasket: Silicone rubber, Screw type: M2.5x6mm
PCB (Printed Circuit Board) Double-sided PCB with SMT components Material: FR4 glass epoxy, Copper thickness: 35μm, Component package: SOP-8, DIP-14
IC (Integrated Circuit) Microchip PIC16F877A microcontroller Package: PDIP-40, Clock speed: 20MHz, Memory: 14.3KB Flash, 368B RAM
Motor Driver IC ON Semiconductor NCV4969 motor driver Package: SOP-8, Motor current: 1A, Logic voltage: 5V
Motor DC brushed motor with planetary gearbox No-load speed: 12000rpm, Stall torque: 50mNm, Gear ratio: 1:100