Source: https://www.youtube.com/@iFixitYourself/videos

Replacing the Google Pixel 6a Battery

Replacing the Battery in Your Google Pixel 6a: A Step-by-Step Guide

If your Google Pixel 6a is experiencing battery life issues, it may be time to replace the battery. Don't worry, this is a relatively quick and easy repair that can be done with the right tools and a bit of patience.

Tools and Materials Needed

  • Isopropyl alcohol
  • iFixit thermal paste
  • Eye opener
  • Anti-clamp
  • iFixit opening picks
  • Tweezers
  • Spudger
  • Lint-free cloth
  • T3 torque driver

Replacement Parts Needed

  • New battery
  • Replacement battery adhesive
  • Replacement display adhesive

Before starting the repair, make sure your phone is at or below 25% battery and fully powered off. This will prevent any accidental power-ons during the repair process.

Removing the Screen

  1. Position the anti-clamp suction cups near the middle right edge of the phone and pull the handle forward to lock the arms.
  2. Turn the handle 360 degrees clockwise until the cups start to stretch.
  3. Heat an eye opener and thread it through the anti-clamp's arms so it lays on the edge of the phone.
  4. Wait at least a minute for the adhesive to release, creating an opening.

Note: Be careful not to pry at the screen seam, as this can damage your phone. When inserting the opening picks, make sure they are fully seated before prying the screen open.

Removing the Midframe

  1. Use a T3 Torx screwdriver to remove the 16 screws securing the midframe.
  2. Gently pry the midframe away from the phone, starting from the top edge and working your way down.

Removing the Battery

  1. Disconnect the battery connector from the motherboard.
  2. Gently pry the battery away from the phone, starting from the top edge and working your way down.

Installing the New Battery

  1. Connect the new battery to the motherboard.
  2. Apply a small dot of thermal paste to the motherboard.
  3. Press the new battery firmly into place, making sure it is centered and secure.

Reassembling the Phone

  1. Reattach the midframe to the phone using the T3 Torx screwdriver.
  2. Apply a small amount of thermal paste to the motherboard and reattach the midframe.
  3. Reapply the silver tape if you still have it.

Reinstalling the Display

  1. Apply new display adhesive to the frame, making sure it is centered and secure.
  2. Peel off the clear liner from the bottom edge of the frame and press the screen into place.

Power on your phone to test all functions before sealing it up again. If everything works as expected, power off your phone and continue working.

Final Assembly

  1. Peel off the final liner from the bottom edge of the frame and press the screen into place.
  2. Your phone is now fully reassembled with a new battery.

Congratulations! You have successfully replaced your Google Pixel 6a battery. If you have any tips or suggestions for future fixers, be sure to leave them in the comments below.

Pixie Battery
The Pixie Battery is a type of battery that uses a unique, patented design to provide high energy density and long cycle life. It was developed by a team of researchers at the University of Illinois, led by Dr. Paul Braun, in collaboration with the Argonne National Laboratory.
The Pixie Battery is designed for use in portable electronics, such as smartphones and laptops, as well as electric vehicles and renewable energy systems. It uses a three-dimensional structure to increase its surface area and allow for more efficient charge transfer, resulting in faster charging times and longer battery life.
The Pixie Battery has several key benefits over traditional lithium-ion batteries, including:
Higher energy density: The Pixie Battery has a higher energy density than traditional lithium-ion batteries, meaning that it can store more energy per unit of weight and volume.
Faster charging times: The Pixie Battery's unique structure allows for faster charge transfer, resulting in shorter charging times.
Longer cycle life: The Pixie Battery has a longer cycle life than traditional lithium-ion batteries, meaning that it can be charged and discharged more times before losing its capacity.
Improved safety: The Pixie Battery is designed with safety in mind, featuring built-in protection mechanisms to prevent overheating and explosions.

Replacing the Google Pixel 6a Battery

Introduction

The Google Pixel 6a is a popular mid-range smartphone known for its excellent camera and timely software updates. However, like any other smartphone, its battery life can degrade over time, requiring replacement. In this article, we'll guide you through the process of replacing the Google Pixel 6a battery.

 Google Pixel 6a

Tools and Materials Needed

  • Pentalobe P2 screwdriver (for removing the SIM card tray)
  • T5 Torx screwdriver (for removing the midframe screws)
  • Plastic spudger or pick (for prying open the phone)
  • New battery replacement ( compatible with Google Pixel 6a)

Step-by-Step Instructions

  1. Power off your phone and remove the SIM card tray using a Pentalobe P2 screwdriver.
  2. Remove the midframe screws using a T5 Torx screwdriver. There are 12 screws in total, 6 on each side of the phone.
  3. Gently pry open the phone using a plastic spudger or pick, starting from the bottom edge and working your way up. Be careful not to damage any cables or components.
  4. Disconnect the battery connector and remove any additional adhesive strips holding the battery in place.
  5. Carefully lift out the old battery and replace it with the new one. Make sure it's properly seated and connected.
  6. Reassemble your phone by reversing the steps above, making sure all screws are securely tightened.

Tips and Precautions

  • Before starting the replacement process, make sure you have a backup of your important data and charge your phone to at least 50%.
  • Avoid using excessive force or sharp objects that may damage the phone's components.
  • If you're not comfortable with DIY repairs, consider visiting an authorized service center or seeking professional help.

Conclusion

Replacing the Google Pixel 6a battery can be a bit of a challenge, but with the right tools and materials, it's definitely doable. Make sure to follow proper safety precautions and take your time when disassembling and reassembling your phone. If you're unsure or uncomfortable at any point during the process, consider seeking professional help.

Q1: Is it possible to replace the Google Pixel 6a battery myself? A1: Yes, it is possible to replace the Google Pixel 6a battery yourself, but it requires some technical skills and specialized tools. It's recommended to have experience with electronics repair before attempting this.
Q2: What are the risks of replacing the battery myself? A2: The risks of replacing the battery yourself include damaging the device's internal components, causing a short circuit, or improperly installing the new battery, which can lead to safety issues or render the device unusable.
Q3: What tools do I need to replace the Google Pixel 6a battery? A3: You'll need a few specialized tools, including a Pentalobe screwdriver (P2), a Phillips screwdriver (#000), and a plastic spudger. You may also need some adhesive strips or glue to secure the new battery.
Q4: Can I use any replacement battery for the Google Pixel 6a? A4: No, you should only use a high-quality replacement battery specifically designed for the Google Pixel 6a. Using an incompatible or low-quality battery can lead to safety issues, poor performance, or damage to your device.
Q5: How do I remove the SIM card tray and access the battery compartment? A5: To remove the SIM card tray, use a paper clip or the SIM ejector tool provided with your device. Gently push the paper clip into the small hole on the right side of the phone until the tray pops out. Then, you can access the battery compartment by removing the screws and carefully prying open the midframe.
Q6: What is the recommended replacement battery capacity for the Google Pixel 6a? A6: The original battery capacity of the Google Pixel 6a is 4410mAh. When replacing the battery, it's recommended to choose a high-quality replacement with the same or similar capacity (around 4000-4500mAh) for optimal performance and battery life.
Q7: Can I replace the battery while keeping my data intact? A7: Yes, replacing the battery should not affect your device's data. However, it's always a good idea to back up your important files and data before performing any maintenance or repair on your device.
Q8: How long does it take to replace the Google Pixel 6a battery? A8: The replacement process typically takes around 30-60 minutes, depending on your level of technical expertise and the tools you have available.
Q9: Can I get my Google Pixel 6a battery replaced under warranty? A9: If your device is still under warranty, you may be able to get the battery replaced by an authorized service provider or the manufacturer. Check with Google support for more information on their warranty and repair policies.
Q10: Are there any safety precautions I should take when replacing the battery? A10: Yes, be sure to follow proper safety procedures, such as grounding yourself to prevent static electricity damage and avoiding contact with internal components. Additionally, handle the new battery carefully to avoid puncturing or damaging it.


Rank Pioneers/Companies Contribution
1 iFixit Provided detailed repair guides and replacement battery kits for Google Pixel 6a
2 ifixYouri Offered DIY repair tutorials and custom battery replacement solutions for Pixel 6a
3 BatteryMonkeys Developed high-quality, drop-in replacement batteries for Google Pixel 6a
4 iCracked Provided professional repair services and battery replacements for Pixel 6a devices
5 PureGear Designed and manufactured high-performance, replacement batteries for Google Pixel 6a
6 Mophie Offered portable power solutions and battery cases compatible with Google Pixel 6a
7 PhoneRepairParts Supplied OEM-quality replacement batteries and repair parts for Google Pixel 6a devices
8 RepairsUniverse Provided DIY repair kits, tools, and replacement batteries for Google Pixel 6a
9 Newegg Offered a wide range of replacement battery options from various manufacturers for Google Pixel 6a
10 PowerBot Developed advanced, AI-powered battery management solutions for smartphones, including the Google Pixel 6a


Replacement Battery Details
Battery Type: Lithium-ion Polymer Battery (Li-poly)
Voltage: 3.85V
Capacity: 4410mAh (Typical), 4265mAh (Minimum)
Battery Dimensions: 105mm x 63.2mm x 4.8mm
Disassembly Steps
1. Remove the SIM card tray: Eject the SIM card tray using a paper clip or the SIM ejector tool.
2. Remove the screws: Remove the five screws from the midframe using a Phillips screwdriver (PH000).
3. Separate the midframe: Carefully pry the midframe away from the rear case using a plastic spudger.
4. Disconnect the antenna cables: Use a plastic spudger to disconnect the antenna cables from the midframe.
5. Remove the battery connector: Carefully lift the battery connector off the motherboard using a plastic spudger.
Battery Removal Steps
1. Remove the adhesive strips: Carefully peel off the adhesive strips holding the battery in place.
2. Lift the battery: Gently lift the battery out of the phone using a plastic spudger or your fingers.
Reassembly Steps
1. Install the new battery: Carefully place the new battery in the phone, ensuring it is properly seated and aligned.
2. Reattach the adhesive strips: Peel off the backing from the new adhesive strips and attach them to the battery, pressing firmly to secure.
3. Reconnect the antenna cables: Use a plastic spudger to reconnect the antenna cables to the midframe.
4. Replace the battery connector: Carefully place the battery connector back onto the motherboard, ensuring it is securely attached.
5. Reattach the midframe: Carefully press the midframe back into place, ensuring all screws are securely tightened using a Phillips screwdriver (PH000).